Engine swaps are popular amongst the Subaru community. However, most owners are unaware that Subaru uses different rear timing covers for the manual transmission (MT) vehicles than they do for the automatic transmission vehicles (AT). The difference is this, the MT engines include 3 additional timing belt guides (2 in the Right and 1 in the left rear cover), whereas the AT engines do not. These additional guides keep the timing belt from skipping during hard MT shifts. Keep this in mind when installing a AT engine into a MT chassis since these engines have zero tolerance valve trains (skipped teeth can bend valves). The solution, remove the entire timing assembly and install the correct MT rear timing covers along with the belt guides.
Note, the rear timing covers arrives bare, as shown in the image.
Complete Timing Cover Option
For those who want a complete RIGHT REAR cover, the individual parts are listed on our website as well as offered in a Complete Version that includes the following:
- gaskets (13583aa280 x 1, 13583AA270 x 1, 13583aa260 x 1)
- grommets (13592aa011 x 5)
- timing guides (13145AA010 x 2)
- timing guide bolts (800406050 x 4)
Location = RIGHT REAR, same side as the single turbo
Contact us for any JDM or USDM Subaru OEM parts not found on the website.
JDM version 7/8/9 ej205
JDM ej205x and ej205y
JDM version 7/8/9 ej207
Forester XT 2004-2013
Impreza GT 2008-2010
Legacy GT 2005-2012
Outback XT 2005-2009